BSMWR - QB-300 MULTIPURPOSE CONSTRUCTION ADHESIVE
- MSDS: BSMWR
- Manufacturer: OHIO SEALANTS INC
- Product Name: QB-300 MULTIPURPOSE CONSTRUCTION ADHESIVE
- National Stock Number: 8040-00F031220
Product Identification
Product ID:QB-300 MULTIPURPOSE CONSTRUCTION ADHESIVE
MSDS Date:06/26/1990
FSC:8040
NIIN:00F031220
MSDS Number: BSMWR
Responsible Party
MENTOR, OH 44060
US
Emergency Phone: 800-424-9300
Info Phone: 216-255-8900
Preparer: DEBI FELLOWS
Cage: OHIOS
Contractor
Telephone: 216-255-8900;800-321-3578
Cage: OHIOS
Ingredients
HEXANE, N-HEXANE
CAS: 110-54-3
RTECS: MN9275000
Fraction By Weight: 10%
OSHA PEL 1800 MG/CUM
ACGIH TLV: 176 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ISOPARAFFINIC HYDROCARBONS (NAPHTHA PETROLEUM),
CAS: 64742-48-9
Fraction By Weight: 20%
ACGIH TLV: 400 PPM
9.65
RTECS: 9999999WG
30-40% W/W
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION &
DERMATITIS. INHALATION: RESPIRATORY IRRITATION, ANESTHETIC & OTHER
CENTRAL NERVOUS SYSTEM EFFECTS. INGESTION: GASTROINTESTINAL
IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: REDNESS, TEARING & BLURRED VISION. SKIN:
DEFATTING. INHALATION: HEADACHE, DIZZINESS & FATIGUE. INGESTION:
NAUSEA, VOMITING & DIARRHEA.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER; APPLY A MILD CREAM. INHALATION: REMOVE TO FRES
AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN. IF BREATHING
STOPS, GIV E ARTIFICIAL RESPIRATION. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:0F
Lower Limits:1%
Upper Limits:6.75
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE WATER TO COOL MATERIAL IN VICINITY. WEAR
SELF-CONTAINED BREATHING APPARATUS W/FULL FACEPIECE.
Unusual Fire/Explosion Hazard:WATER MAY BE UNSUITABLE EXCEPT AS A
COOLING MEDIUM. USE FOG NOZZLES. ANY CLOSED CONTAINER MAY RUPTURE
WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
CONFINED AREAS BY OPENING WINDOW & DOORS. SCOOP INTO SEALABLE
SAFETY CONTAINER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
DON'T CUT OR BURN RECEPTICALS THAT HAVE CONTAINED A SOLVENT-BASED
MATERIAL. DON'T REUSE THIS CONTAINERS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED, USE NIOSH/MSHA JOINTLY
APPROVED AIR-SUPPLY RESPIRATOR
Ventilation:SUFFICIENT MECHANICAL (GENERAL &/OR LOCAL EXHAUST) TO
MAINTAIN EXPOSURE BELOW TLV
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:CHEMICAL APRON
Supplemental Safety and Health
BOILING RANGE, EVAPORATION RATE, VAPOR PRESSURE & VAPOR DENSITY IS FOR
SOLVENT ONLY.
Chemical Properties
Boiling Pt:B.P. Text:150-200F
Vapor Density:>1
Evaporation Rate & Reference:(N- BU AC = 1): 4.4
Appearance and Odor:TAN, NON-SAG MASTIC SEMI-SOLID SOLVENT W/MILD
HYDROCARBON SOLVENT ODOR
Percent Volatiles by Volume:51
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS LIQUID CHLORINE, NITRIC ACID &
HYPOCHLORITES
Stability Condition to Avoid:HEAT, SPARKS & OPEN FLAME
Hazardous Decomposition Products:FUMES & SMOKE CONTAINING CO & CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.